How to film onboard laps people actually watch

The onboard lap is the oldest karting video there is, and it still pulls an audience. Speed CQ's GoPro POV of Supercharged Entertainment in New Jersey runs to nearly eight minutes and has 3.49M views. Buckmore Park's own RT10 hot lap lasts just over a minute and has passed 10K. Most onboards, though, get skipped in the first two seconds: the camera is wobbly, the horizon is crooked, the video starts with 40 seconds of pit lane, and nothing on screen tells you why you should keep watching.
This guide is for venues filming their own track. It covers the rules, the mount, the angles, the settings and the edit.
Decide your camera policy first
Your guests will ask whether they can film, so settle your answer before you film anything yourself. UK venues handle it in quite different ways:
- TeamSport lets you use your own helmet cam if it's securely mounted on your own helmet, but you can't attach anything to its helmets, and it doesn't allow chest mounts or cameras on the karts. It sells race footage instead, with a free five-second preview (TeamSport head cams).
- Buckmore Park has fitted dedicated camera mounts and tethers to its senior and junior fleets, so you clip your camera on and loop the tether over it. Shoulder mounts are allowed, but cameras on helmets, chests or anywhere else on the kart are not (Buckmore FAQ).
- Kart Silverstone fits the camera to the helmet itself and charges £10 for the video if you prepay (before your visit).
All three are reasonable policies. What matters is having one, publishing it, and briefing staff on it. Whatever you decide, the same rule applies to everyone: no phones held or loose in a moving kart.
Mounting a camera on a rental kart, the careful way
When you film your own content, do it in a closed session with staff drivers, never during public sessions. Then:
- Let your kart technician pick the spot. It should be a rigid part of the frame or a purpose-made bracket, well clear of the driver's hands, legs and the steering, and nothing that moves or gets kicked.
- Use a mechanical clamp. An aluminium tube clamp with a GoPro-style or 1-inch ball adapter is the usual choice, rather than a suction cup or a sticky pad on the bodywork. For comparison, Motorsport UK's competition rules don't accept suction mounts as the primary fixing and cap a kart camera at 200g including its case. Those rules don't govern arrive-and-drive, but they make a sensible benchmark.
- Add a tether. Use a short lanyard from the camera to the frame so it can't end up on the track if the clamp lets go. Buckmore puts a tether on every mount for exactly this reason.
- Use an action camera, not a phone. A GoPro, DJI Osmo Action or Insta360 is light, sealed and made to be clamped. A phone is heavier and fragile, and its lens sits off-centre.
- Test before you push. Do one slow lap, then check the clamp and fasteners. Re-check after every session, and write down which kart and position you used so you can repeat the shot.
- Leave hire helmets alone unless the helmet maker and your insurer are happy with what you're attaching.
For more detail, Dante Dhillon's complete guide to recording your karting has chapters on helmet, chin, chest, shoulder and kart mounts. CrowEater Motorsport's best places to mount action cameras on a racing kart lists the clamps they've found actually last, and Oskar Savicki tested how much each position costs aerodynamically. These are race-kart setups, so ask your technician what translates to your fleet.
The four angles, and what each one is for
Helmet or chin POV. This is what the driver sees, and it's the best angle for track guides. A chin mount sits lower and steadier than one on top of the helmet. RedHead Racing's helmet vs chin comparison shows the difference in 12 seconds. Only use it within your helmet policy.
High rear, looking forward. A camera behind the seat that shoots over the driver's shoulder shows hands, wheel and track together. It's the angle to use when you're teaching something, such as where to brake or how much steering to use.
Low front or side. This one is for speed, not information. Use two- or three-second cutaways of tyres and kerbs and tarmac rushing past. Don't use it for a whole lap.
Trackside, on a tripod. This is the most underrated angle, and it needs no mount at all. Put a phone on a tripod at a marshal post or behind the barrier at a corner exit, with the venue's agreement on where it's safe to stand. It's the shot that makes racing-line videos work (see our racing-line explainer guide).
William Lee's 37-second round-up of action camera mounts for karting (44K views) is a quick way to show your team the options.
Settings that save the footage
Action camera:
- Resolution and frame rate: 4K or 2.7K at 60 fps. The extra resolution lets you crop a 9:16 vertical out of a landscape frame.
- Lens: a Linear or horizon-levelled mode, which takes out the fisheye bend on straights.
- Stabilisation: on (HyperSmooth on GoPro, RockSteady on DJI, FlowState on Insta360). Kart vibration ruins unstabilised footage.
- Audio: turn wind reduction on. Keep the kart sound in the edit, because it tells viewers what they're watching.
- Bright days: if outdoor footage looks jittery and over-sharp, an ND filter brings back some natural motion blur.
Brody Robins' 19-second "Best camera settings for karting" is a handy reference card.
Phone (trackside and walk-through shots only):
- On iPhone, go to Settings › Camera › Record Video and choose 4K at 60 fps. Long-press the track to lock exposure and focus (AE/AF Lock), so the picture doesn't pump when a bright kart passes. Action Mode on iPhone 14 and later smooths out walking shots.
- On Android, pick 60 fps in the camera settings and turn on the stabilisation mode (on Samsung it's called Super Steady). Menu names vary by brand.
- Turn on Do Not Disturb, clean the lens, and turn on the grid so the horizon stays level.
Edit for the scroll
- Start at speed. Cut the out-lap. The first frame should be mid-corner, with the lap timer already running.
- Put information on screen. Show the lap time, the corner number and one line of text: "Where do you brake for Turn 4?" Questions bring comments, and comments bring reach.
- Keep it short. Many indoor laps fit inside a Short: TeamSport says an average lap at Reading is 58 seconds, and Buckmore's National circuit runs close to 35. Post the full lap on YouTube and the best corner on Shorts, Reels and TikTok.
- Name it like a search. TeamSport titles its laps "Go Karting in Bristol - Flying Lap", and Google suggests searches like "lakeside karting youtube" and "teesside karting youtube". People search for your venue's name, so put it first.
- Tag the booking link. Buckmore adds a source tag to the booking link in each description (
?source=YT-INDEPTHGUIDE), so it can see which video sent the visit. It's free and takes ten seconds.
A filming rhythm
Film one master lap per layout each season, and again whenever the surface or layout changes. Cut it four ways: the full lap for YouTube, three single-corner clips for short-form, and one "can you beat this time?" post for the leaderboard. That's a month of onboard content from one morning.
If filming isn't practical (it's winter, the track is booked solid, the camera kart is in bits), GoKartLap can render onboard and top-down laps from a virtual arena of your own circuit. Guests can then drive that same layout on their phones.







